Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pumps/Inflation

Genuine Innovations Presta Valve Adaptors
$2.99
Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. - Card of 12 - Construction: aluminum - Airtight O-Ring Seal/Screw On
Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Emergency Tire Boot
$3.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Genuine Innovations CO2 Refill Cartridges (20-pack)
$4.99
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Genuine Innovations Side of Bacon
$7.99
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Topeak Presta Valve Extender
$8.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Genuine Innovations 16-Gram Threaded CO2 Cartridges (2-pack)
$9.49
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Blackburn CO2 3-Pack 16G Threaded
$9.99
Refills … Get your refills here! - Threaded - 16 gram - 3 pack
Giant Control Blast 16-gram Threaded CO2 Cartridges (3-Pack)
$11.00
Giant's Control Blast 16-gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately). • Foam-padded cartridge provides insulation
Genuine Innovations 20 Gram Non Threaded CO2 Cartridges
$12.99 - $21.99
20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires. These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators. Available in a 2-pack or 6-pack!
MSW CO2 Cartridge: 20g (3-Pack)
$12.99
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
Blackburn Wayside CO2 Thread-On Inflator
$14.99 - $17.99
- CNC alloy construction - Simple, proven spring loaded valve design - Presta & Schrader valve compatible - Accepts all threaded CO2 cartridges - 55 grams
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Giant Control Blast 2-Pack 25g Co2 Threaded Cartridges
$17.00
- Foam padded cartridge provides insulation - Large volume makes filling big tires quick and easy
Park Tool Mini Pump
$18.95
Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)
Portland Design Works Shiny Object CO2 Inflator
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
Blackburn CO2 3-Pack 25G Threaded
$19.99
Refills … get your refills here! - Threaded - 25 gram - 3-pack
Genuine Innovations 16-Gram Threaded CO2 Cartridges (6-pack)
$19.99
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Genuine Innovations Microflate Nano
$19.99
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Giant Control Blast 1 CO2 Inflation Kit
$21.00
Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.
Giant Control Blast 2 CO2 Inflation Kit
$21.00
Giant's Control Blast 2 CO2 Inflation Kit consists of an inflator head that fits Presta valves and a 16-gram threaded CO2 cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.
Giant Control Tower 4 Floor Pump
$21.00
Inflating up to 120psi and handling both Presta and Schrader valves, Control Tower 4 is constructed with a reinforced composite barrel and plastic base. With an ergonomic handle it comes fully loaded with a ball needle and inflator for a practical, multi purpose pump. - DoubleHead valve - Ball inflator accessories included - Plastic barrel and base - Durable steel shaft
Crank Brothers Gem Pump
$21.99
Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.
Genuine Innovations HammerHead
$21.99
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Genuine Innovations Ultraflate
$21.99
Comfortable, durable and most of all reliable, the Ultraflate is Genuine Innovations' most tried and true cupped inflator. Its reinforced glass nylon construction and brass internals means it can take the strain of everyday use and still maintain precision inflation performance. - Trigger-controlled technology for fast, easy and controllable CO2 inflation - Built-in "trigger lock" to prevent accidental discharge - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes (1) Ultraflate inflator head (1) non-threaded 20 gram CO2 cartridge
Portland Design Works Tiny Object
$22.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
Page 1 of 3 Next page