Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
RaceFace Chester Pedal Pin Kit 20 Pins Black
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Replacement pin set for Race Face Atlas and Aeffect pedals.
$13.99 - $19.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
$14.19 - $19.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals
- Cleats to fit Ritchey Echelon and Look Keo clipless pedals - Includes a pair of cleats and hardware
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic
- Extends pedals - Not for use on exercise bikes
- 1-Piece, molded, cage-style body - Loose ball bearings - Accepts toe clips/straps - Spindle Material: Chromoly - 305g
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
Rebuild kit for Race Face Aeffect pedals.
$26.99 - $29.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
Page 1 of 3 Next page