Parts & Accessories
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
RaceFace Chester Pedal Pin Kit 20 Pins Black
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Replacement pin set for Race Face Atlas and Aeffect pedals.
$14.19 - $19.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
- Extends pedals - Not for use on exercise bikes
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Rebuild kit for Race Face Aeffect pedals.
- Steel - Intended for use with double-strap toe straps (sold separately) - Classic road toe clip profile - Includes mounting hardware - 36 grams per pair
$26.99 - $29.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- Steel - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 50 grams per pair
Replacement axles for Race Face Atlas pedals.
Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
Page 1 of 2 Next page