Ride Comfortably

- Wind resistant softshell - Ax suede synthetic leather palm for grip on handlebars - High pile wool/acrylic blend to insulate palms - Slip on cuff - silicone grip controls for touch screen compatibility

When all you need is a shield to block wind, there is Draugenklaw. The sleek, and open design makes it easy to get your hands in and out for riding in single track or commuting. A zippered handlebar closure and bar-end mount make it simple to install and remove, while still providing a secure fit. Reflective wrist cuff promotes visibility for commuting or city riding. - Provides basic wind coverage while wearing insulated gloves - Zippered handlebar closure with simple hook-and-loop strap - Bar-end plug attachment for easy installation and removal - Reflective print on main shell for visibility

For late fall through winter and into early spring riding conditions, Sturmfist 5 protects against cold, wind, and water — all the elements that can make or break a ride. With high-tech materials backed by quality design and construction, Sturmfist 5 has everything you want in a pair of cold weather bike gloves. Keep your hands warm and comfortable in temperatures from 35 degrees F (2 degrees C) down to 15 degrees F (-9 degrees C). - Water- and wind-resistant shell fabric on back of hand - Water-resistant goat leather on palm - 100g Polartec Alpha insulation - Merino wool-blend lining

A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 18mm high - Spindle diameter: 9/16-inch - Weight: 352 grams

For days when the mercury plugs below 15 degrees (-9°c), Sturmfist 4 provides unmatched performance by combining superior fabrics and insulation technologies. - Water/wind-resistant shell on back of hand - Water-resistant leather on palm  - 300g Polartec Alpha insulation - Aerogel insulation in palms protects against conductive heat loss

- Warm, comfortable bibs with fleece lining for winter riding - 4/5 length to compliment winter cycling boot fit - No Chamois - Front zip with mesh back for breathability - Wind resistance front thigh panel - three-pocket rear storage - Made with 16% recycled materials - Can be layered under Naughtvind shell pants

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

Designed specifically for cool and wet conditions, Ragnarök provides a high level of water resistance, moisture regulation, and comfort in a performance cycling shoe. Constructed with a BOA closure, waterproof membrane, and rubberized shell that extends above the ankle, Ragnarök delivers unrivaled weather protection in the wettest and muddiest of conditions. - Hook-and-loop neoprene ankle - BOA closure with IP1 low power reel - Works with 2-bolt mountain compatible cleats - Black finish - 25ºF+ / -3ºC+ Comfort

Featuring our Ultra GEL Chamois for added comfort, this short is loaded with performance and value. Features: - Perfect for touring or commuting - Durable, lightweight construction - Reflective tabs for increased visibility - Gusseted design removes seams under chamois - Tough "Ultralight" hydrophobic polyester outer shell - Mesh inner short with chamois - Two deep side pockets with zippered closure - Inseam: 9" (Size Medium)

Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.

Narrow for pedaling freedom and reduced weight, the C15 redefines priorities, aiding performance by placing comfort at the fore. Firm, yet remarkably supple, the C15 will reward you with increased performance on long journeys, banishing forever the effort wasted simply perching atop your machine when the distance starts to add up. - Length: 283mm - Width: 140mm - Height: 52mm - Weight: 405 grams - Frame: Steel

The Juniper is a performance oriented women's saddle with a firm, sleek, medium-profile platform. Widely considered Chromag's most comfortable saddle by women and men alike, the wide nose provides friendly contact in technical maneuvering situations.

The versatile Trailmaster features a medium size platform and a rounded uninterrupted perimeter that is easy to get behind and move around without any snaggy or sharp edges. Medium-firm density foam with a padded nose is excellent for technical climbing and “body english” as well as all day epics. A flat sitting area with a central relief promotes sitting on your bones. The Trailmaster features a supple perforated natural leather top and Chromoly rails for durability.

Beauty and the Beast are the two words that best describe this super technical women’s winter pant. Designed to be semi-fitted with plenty of stretch, the Imogene provides the tech features to allow you to play in winter environments then transition seamlessly into the city scene. Tested everywhere from snowbikes and dogsledders, to city commutes, the waterproof-breathable front leg fabric stretches to meet your seasonal active needs. The durable stretch soft-shell fabric delivers a rough and tumble on your rear. Two side leg vents create the added airflow needed during high energy movement, and the gusseted bottom leg opens to accommodate your winter boots. From the mountains to town, the Imogene is designed to meet all your winter needs. - Midweight bonded waterproof breathable stretch membrane | 8000MM (front) - DWR finished midweight polyester-blend double woven stretch fabric (back) - 2 front pockets, 2 rear pockets, 2 zippered side leg pockets - 2 zippered side leg vents - Zippered bottom leg opening - RideLight reflective accents - Sport fit

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI

The Endura Women's Thermolite Tights are warm enough for riding, running, or even cross-country skiing, because they're made of Teflon-treated Thermolite, which insulates great to keep you comfortable in even harsh conditions. The double-thickness knee panels add warmth and protection. Other great details include gusseted ankles with self-locking zippers, silicone leg grippers for a great fit, and reflective details for enhanced visibility.

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

- 2.5mm thick, ergonomic handlebar tape for all road bike disciplines - EVA foam distributes pressure and reduces hand discomfort - Tape is durable and provides increased vibration damping - Anti-slip surface texture - Built-in wrapping guide for thinner or thicker wrapping - Wrap in two directions; for increased grip or more freedom of movement

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

The bar end of the GP2 has been re-engineered, and improvements made to the product – better ergonomics, function and a higher quality feel. The GP2 now has a bar end with an installation friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting

The Delta pedal is upgraded with a stainless abrasion plate to decrease direct scratch to pedal body, which increases durability. In addition to that, the material has been changed to thermoplastic which makes it lighter weight. The E-PR73ST features low stack height which allows greater ground clearance as well as increased pedaling efficiency. - 85 x 94 mm - Fiberglass-reinforced thermoplastic, enclosed mechanism, tension adjustable with gauge - 9/16"