The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg
Whether you're kitting out your ride to be a full-on grocery-getter or just trying to get that sweaty backpack off your back, this adjustable rack gives you a whole new home for all of your haul-ables! - Aluminum - Carries up to 20 lbs - Easily add a crate! - Fits on all Pure Fix and Pure City bikes EXCEPT Premium Series, Urban Commuter, and Keirin Track Completes
- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
A disk brake compatible update of the original rear rack design where it all began for Blackburn in 1975. - Mounting system works with disc brake frames and bikes lacking rear dropout rack mounts - Lower mounting points attach to included extra-long QR skewer - Three strut design for maximum load control - 12mm gauge aircraft-grade aluminum rod ensures long lasting durability - Fits both wide and narrow tire - Fits 26" and 700c frames - Compatible with Copilot child seats - 535 grams - 40lbs/18.2kg carrying capacity
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Specifically engineered to fit a 12-pack of beer and your u-lock, this classy rack is ready to haul it all! Whether it's a run to the corner store, class, or just another day at the office the Urban Rack will cradle your essentials comfortably between its tie-down rails, or you can remove the rails to tote extra-wide loads all the way to your destination! - 9 1/2" wide x 11 1/4" long x 3" high for inside rail measurement.
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
$160.00 - $169.99
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
The Benno Mini Front Tray rack mounts directly to the frame of Pre-2020 Boost E, eJoy, eScout, RemiDemi and Carry On models, holding up to 35lbs of cargo. - Dimensions: 28cm x 28cm x 6cm (W x L x H) - Max load: 35lbs/15kg
The Benno Mini Sideloader set extends the carrying capacity and convenience of the Boost E and Carry On bikes when used with select Benno Racks. The Sideloader allows the use of the large Utility Pannier bags, or when used with the Wheel Guard set creates a footrest for children riding on the rear rack. - Max Load 33lb per side. Maximum combined load of rack and Sideloaders not to exceed 110lbs - Sold in pairs - Fits Benno Boost E and Carry On models
Page 1 of 2 Next page