Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
- Ideal for fitness and comfort cyclists - A great replacement handlebar
- Ideal for fitness and comfort cyclists - A great replacement handlebar
- Traditional trekking 35-degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
- Traditional trekking 20-degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
- Butted 6061 aluminum - Double butted 6061 alloy - 35mm rise - 9 degree sweep - Width: 670mm - 25.4mm center section
Origin-8's Urban MX Riser Handlebar is made from lightweight, durable 6061 aluminum. It provides a 60mm rise and a narrow 560mm width. A large grip surface leaves you plenty of room to move your hands or mount necessities like lights, bells, and computers.
From loamy backwoods adventures to rocky desert expeditions, Giant's Connect Trail Riser Handlebar puts you in contact with it all. It's made from tough 2014 aluminum. And, it has plenty of width, which provides pinpoint steering on techy trail sections plus leverage for climbing and sprinting.
Giant's Connect XC Flat Handlebars are engineered from aluminum and feature a 5° upward sweep, perfect for those cross-country rides.
Giant's Connect XC Riser Handlebar is great for riders that like a little bit of rise, but still want to keep an aggressive, forward position. It's made from 2014 aluminum for reasonable weight and great strength. And, it has plenty of width, which provides pinpoint steering on techy trail sections plus leverage for climbing and sprinting.
The Belleville is Velo Orange's reproduction of what is probably the most popular style of French city and utility bike bar ever. Anyone who enjoys classic European films has seen bars like this dozens of times. The Belleville is 430mm wide (or 450mm outside-to outside) and has zero rise. That's fairly narrow for a city bar, which is an advantage in traffic. Reach is about 180mm; the straight grip section is a generous 150mm. It has a 25.4mm clamp area and is rendered in aluminum alloy. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard inverse shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
$32.95 - $43.95
- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction
$35.00 $69.99 50% Savings
The Race Lite Riser mountain bike handlebar is the perfect lightweight weapon for a hard-fought PR on a local climb or even a podium at the local cross-country race, or a durable tool for long excursions along epic singletrack. Triple-butted alloy keeps it stiff and light for power and strength. - Triple-butted, tapered wall, 7050-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - Bar end compatible - Go green and save green - Zero packaging means zero waste and zero extra cost
- Short reach, shallow drop with a smooth, double-radius drop section - Center section is aero bar compatible - No-slip grit at stem and brake lever mounting surfaces - Double Butted 6061 Alloy - Measured Center-to-Center where the levers mount - 31.8mm O/S center section - Drop/Reach: 128/73mm - 300g (42cm)
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Giant's Connect XR Flared Road Handlebars give a short reach and shallow drop for easy access to the controls. The dual radius drops are flared out for greater stability when you're down low and the top profile is an oval shape so your hands stay comfortable as you ride.
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
$45.00 $89.99 50% Savings
Great bar shape allows multiple hand positions in and out of the drops. Hammer in the drops Race Lite is shot-peened and anodized for the ultimate defense against fatigue and constructed of custom-butted 7075 aluminum to achieve the lowest possible weight without sacrificing strength and durability. - Custom-butted, 7075-T6 alloy construction - Double cable groove for shifter and brake cables - Compatible with Bontrager Aero Clip-on Handlebars - Laser-etched brake lever position lines for spot-on control setup - Go green and save green – Zero packaging means zero waste and zero extra cost
$45.00 - $75.00 $75.00 Up To 40% Savings
Easton's EA70 Road Handlebar offers awesome strength, low weight and superb control for your road bike. It's constructed from aluminum with TaperWall technology that puts material where you need it and none where you don't. Plus, its ergonomic bends put you in a natural, efficient riding position, while the bar’s double-groove design provides flush cable routing for a clean look and a comfortable grip.
- Tough 2014 Aluminum Alloy - 9° Rearward / 6° Upward Sweep
Giant's Contact XC Flat Handlebar is made from tough 2014 aluminum for durability and stiffness at a respectable weight. The 690mm width gives you pinpoint steering and the 5-degree sweep is comfortable on your wrists.
Fyxation Comet Drop Handlebars: With a 140mm drop, the Comet Track Drop bar is at home navigating city traffic or going head to head in match sprints. The Comet track drop handlebar uses 6061 aluminum and is light, durable, and strong enough to handle the demands of any rider.
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
$49.90 - $53.90
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
$49.90 - $53.90
- Shot-peened tange aluminum that makes for a great narrowish touring/townie bar - Compatible with MTB grips and shifters - Can be used flipped as a riser bar or down for a less upright position
Twelve degree flared drop means forearm clearance when in the drops and greater leverage than a non-flared bar. Ritchey's Comp EvoMax is the ideal shape for on- or off-road builds from a mixed-terrain road bike to cross to mountain! - Evo Curve shaped top with 12-degree flare of the drops - Double butted 6061 alloy - Drop/Reach: 120/73mm - 12 degree drop flare - 4.7 degree sweep, 0 degree flare - BB Black finish - 292g (42cm)
Page 1 of 7 Next page