Wheels

Upgrade or refresh your Bontrager wheels. Product details - Replacement, high-quality rim strips that help prevent flat tires - Compatible with nearly all common wheels - Width refers to internal rim dimension - Not Tubeless Ready - Sold as singles

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Zipp 101 XPLR MOTO Rim Strip And Tubeless Tape Kit (includes rim strip and tubeless tape for 1 wheel).

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto our Vault Hub gives you a stronger, stiffer wheel construction and the Vault’s Super Fast Engagement, long bearing life, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - Low drag labyrinth cassette body seal - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

- Braking surface: Machined aluminum - Rim weight: 455g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 24, 28, 32 - ERD: 580 - Max tension: 1200 N/122 KGF

Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle

WHY WE MAKE THIS It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market. WHY YOU WANT IT R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there. On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive™ system. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - Legendary made-in-house bearings · King Lifetime Warranty - Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag-free engagement - Available with Shiamano/Sram HG or Sram XDR drive shell - 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Available in 24h, 28h, and 32h - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub HUB SPECIFICATIONS: - Axle Width: 142mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 18.7mm - Center to Flange NDS: 33mm

- Made start to finish in Asheville, NC - Light weight and easy to service

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Whisky's No.9 30w rims are the most versatile performance rims they offer. A 25mm internal width works well with tires from wide and plus road tires to full-on mountain bike tires. Whisky offers this rim in both 650b/27.5” and 700c/29” sizes, so there’s one to fit any bike in your stable. These rims feature hookless beads designed for easy tubeless set up and impact resistance. Light and wide, they offer great performance and versatility. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

- Double butted 2.0/1.5/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 143g @ 32/265mm - Box of 72 - Nipples sold separately

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

New WCS hubs using a ratchet system freehub. - 24.8mm inner width rim with a 19.1mm height - DT Swiss Competition double butted spokes - 1840g with the included TLR rim tape

Industry Nine Torch end caps allow the conversion to a variety of rear axle standards. - Compatible only with Torch hubs and wheelsets - Includes two end caps - Compatible only with Torch MTB and Fat Bike hubs (not compatible with Road or CX Disc hubs)

Salsa springs for Flip-Off skewers

Replacement freehub bodies for Easton X5 hubs. - Material: Aluminum - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain

Grade 10 chromium steel balls

This is our Excellent Adventure Thru-Axle. It upgrades your bike's rear end for hauling cargo trailers, should you feel like taking Rufus along on your errands. Extensive product testing with our Bill and Ted Trailers provided an "awesome experience," but time travel remains a risky endeavor. Designed for use with slotted horizontal or vertical single-position dropouts, the Excellent Adventure Axle is compatible only with 12 x 148mm hubs. Compatible Surly models include Skid Loader, our compact electric cargo bike, as well as Karate Monkey, Krampus, Grappler, Ogre, Lowside, ECR, and Troll. Once again, the 12 x 148mm hub requirement cannot be overstated. Visit your local Surly dealer to discuss other scenarios you may have in mind. - 12 x 148mm hub compatibility only - Designed for use only with Surly's Bill and Ted Trailers - Works with slotted horizontal or vertical single-position dropouts

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.