Your Search: "salsa cutthroat"

- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips

Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)

The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181) - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame

- Grip tapers up towards the lock-ring for comfort and security - Single-sided lock-on collar - 134mm overall length including the locking collar - Only Compatible with Salsa Lock-on Collars - Grip only, no lock rings. - For replacement use

Keep it fresh and simple with this Salsa logo tee. It's a fitting piece for any backyard gathering, post-ride brewery visit, or recovery couch session. - Relaxed fit - Crew neck - Soft cotton construction

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Shield your neck and face from cold air, dust, or whatever else you’re up against on your rides and commutes. - Synthetic material - One size fits most - Matches Salsa Arctica jerseys, bottle, hats, and socks

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Wrap your handlebars in comfort, luxury and style with Salsa's Gel Cork Tape. It's made from cork with a vibration-damping gel backing and is embossed with the Salsa logo. And, with a variety of palette-pleasing colors to choose from, you're sure to find your favorite one!

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Keep it fresh and simple with this Salsa logo hat. It’s a fitting piece for backyard gatherings, post-ride brewery visits, or nights around the fire after a day of bikepacking. - 6-Panel Structured Flat Bill Trucker - Mesh back - Snap closure - Raised 3D Embroidery

A proper cycling cap keeps your eyes glare- and moisture-free. This one is designed to do just that, with a carefully measured amount of panache woven in. - Four-panel design - Matches Salsa Latitude jerseys, bib short, vest, gloves, socks, and bottles

Quench your thirst on road, gravel, or singletrack rides with this classic 22 oz bottle. - BPA-free plastic - 100% FDA food-grade materials - Non-solvent base (UV cured) CPSC-approved ink - Volume: 22 oz - Matches Salsa Latitude bib short, jerseys, vest, cap, and socks

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

Your feet are one of only three contact points on your bike—don’t they deserve to be happy? These comfortable, breathable socks are sure to satisfy on even the longest rides. - Made with ultra-wicking, breathable fabric to keep dry - 8" cuff - Sizes: SM/MD and LG/XL - Matches Salsa Latitude bib short, jerseys, vest, cap, and bottles

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

Quality shorts and great rides go hand in hand. Keep your rides comfortable with these supportive and breathable bibs. - Contoured seaming for exceptional fit - Breathable stretch mesh uppers - Flatlock stitching - 7.5 cm-long compression leg bands with Silicone grip stripe - Matches Salsa Latitude jerseys, vest, gloves, socks, cap, and bottles

Quality shorts and great rides go hand in hand. Keep your rides comfortable with these supportive and breathable bibs. - Contoured seaming for exceptional fit - Breathable stretch mesh uppers - Flatlock stitching - 7.5 cm-long compression leg bands with silicone grip stripe - Matches Salsa Latitude jerseys, vest, gloves, socks, cap, and bottles

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation

These breathable and supremely comfortable bib shorts are designed to support you on any ride, from quick spins to multi-day epics. - Contoured seaming for exceptional fit - Breathable stretch mesh uppers - Flatlock stitching - 7.5 cm-long compression leg bands with Silicone grip stripe - Matches Salsa Polytone jerseys, vest, gloves, socks, cap, and bottles

These breathable and supremely comfortable bib shorts are designed to support you on any ride, from quick spins to multi-day epics. - Contoured seaming for exceptional fit - Breathable stretch mesh uppers - Flatlock stitching - 7.5 cm-long compression leg bands with Silicone grip stripe - Matches Salsa Polytone jerseys, vest, gloves, socks, cap, and bottles

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

Protect your hands from dust, sunlight, brambles, and sweat-induced loss of grip. - Made by Handup - 4-way stretch, lightweight mesh on the back of the hand - Stretch cuff to easily pull gloves on and off without fumbling for a Velcro strap - Durable, single layer Clarino leather palm for maximum bike feel and no extra material bunching up - Matches Salsa Polytone jerseys, bib short, vest, socks, cap, and bottles

Keep your ride beverage at just the right temperature with this 23 oz insulated bottle. - Features a Chromatek liner, a proprietary insulating barrier that lines the core to keep your liquids cold - Squeezable materials allow for unmatched flexibility and comfort - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Volume: 23 oz - Matches Salsa Polytone bib short, jerseys, vest, cap, and socks

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures—this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 20 kids bikes